The cooling circuit of the power steering is «U» -shaped pipeline of great length, located in the front of the engine compartment and connected to the pipelines of the system by means of quick couplings.
Replacing the cooling circuit of the power steering must be carried out in the following order. Using a clean syringe, draw out the working fluid (oil) from the power steering reservoir.
Disconnect quick couplings of pipelines (arrows, fig. 12.7) power steering. Remove the engine coolant and «U» -shaped pipeline (radiator) power steering cooling.
Rinse «U» -shaped pipeline, if necessary, replace it. Install «U» -shaped pipeline for cooling the power steering. Bleed the power steering system and check the fluid level.