The location of the plugs on the manual transmission housing is shown in Figure 8.2. When draining, the manual transmission oil must be at operating temperature.
The oil change must be carried out in the following order. Unscrew the drain plug (1) and filler plug (2) on the manual transmission housing. Let the oil drain and send it for disposal. Clean the drain plug (M18x1.5) and screw it onto the cleaned surface with a torque of 50 N·m (5.0 kgf·m).
Fill the manual transmission with oil (MTF-LT-1) through the plug (2), and the oil level should reach the lower edge of the filler hole. The filler plug (M18x1.5) with an internal hexagon should be installed on the cleaned surface and tightened to a torque of 35 N·m (3.5 kgf·m). The plug M24x1.5 with an external hexagon is tightened to a torque of 50 N·m (5.0 kgf·m).