Manual transmission S5D 280Z
Replacing the sealing ring of the gear selection rod of the manual transmission S5D 280Z must be carried out in the following order. Prepare fixtures «23.0.210» And «23.0.220» and remove the gearbox.
Remove retaining clip (11) from the clip (12) gear selector. Pull out the gearshift rod (10) from the gear selector rod holder and remove the washers.
Pick up the spring ring (1, fig. 8.17), installed in the groove, and slide it to the side, freeing access to the pin (2). Squeeze up (or down) cylindrical pin (2) from the gear selector rod holder and remove the holder (3).
Engage second gear, screw in fixture «23.0.210» (pic. 8.18) until a firm connection with the sealing ring (1). Using fixture «23.0.210» press out the sealing ring.
Lubricate the sealing lips of the sealing ring and the gear selector rod with gear oil and, using the tool «23.0.220» (pic. 8.19), press in sealing ring (arrow).
When assembling, it is necessary to lubricate the shift rod pin and the spherical part of the gear selection rod with Circolight oil and replace the spring ring.