Support bracket replacement (14, see fig. 13.3) drive shaft of the right wheel must be carried out in the following order.
When removing and installing the right wheel drive shaft support bracket, do not press the shaft out of the flange. When replacing the drive shaft (1, see fig. 13.50) wheels and swivel (2) form a single node. Remove the right wheel drive shaft.
Remove bolts (arrows, fig. 13.54) fasteners and remove the support bracket.
Replace o-ring (8, see fig. 13.3) support bracket (14), lubricated with transmission oil.
The installation of the support bracket should be carried out in the reverse order, while it is necessary to tighten the bolts of its fastening with a torque of 26.5 N·m (2.65 kgf·m).
Upon completion of work, check the oil level in the front axle gearbox.