Prepare fixtures «11.9.410» And «11.9.420» and remove the vibration damper hub. Install levers (2) for pressing out the seal (1) horizontally and insert the fixture «11.9.410» (pic. 5.71). Turn the lever (2) in such a way that it grabs the omentum (1) behind. Screw in a bolt (3) until the seal is pressed out (1) from the timing cover.
Stuffing box (1) must only be stored on a special support sleeve. If it has been stored without a support sleeve for more than six months, then it is forbidden to install it.
Attention! The working edge of the stuffing box is very sensitive, and in no case should it be bent. It is forbidden to touch the working edge with your hands.
Separate the support sleeve from the gland (1) and put on the seal (1, fig. 5.72) on the timing cover. Using fixture «11.9.420», by turning the central bolt (3), install the crankshaft front oil seal flush into the timing case cover.